Rear Subframe Poly Bushings for AWD 3000GT / Stealth Set of 4

This is a set of 4 polyurethane bushings for the rear subframe of AWD models.
 
They are made from 90 Shore A polyurethane, providing increased chassis rigidity compared with the OEM rubber bushings, without significantly compromising ride quality.
 
We designed these bushings to be installed without the need for a hydraulic press. The rear subframe is large and heavy, making the use of a conventional press difficult.
To install them, the original rubber bushings must first be burned out with a torch and the remaining rubber removed with a wire wheel. Once the bores are completely clean, lubricate both the bushing and the bore and use two large washers, a bolt and a nut to gradually pull the new bushing into place.
Please note: these bushings are intentionally designed with a light interference fit. They are not designed to slide freely into the original sleeves. The tight fit prevents unwanted movement of the bushing within the sleeve.
 
Fitment:
91-99 3000GT AWD
91-96 Stealth AWD